What is high temperature ducting and how to install it?
High temperature air ducting hose is the most common ventilation flexible ducting in modern industrial production. The surface of high temp duct is concavo-convex, abrasion-resistant, light weight, high flexibility, flexible and bendable, easy to install and use. Widely used in a variety of industries, for example for hot gas extraction from high temperature boilers, vehicle exhaust, factory solder smoke extraction, blower heater discharge and weld gas discharge for exhaust equipment, engine construction, heating engines, solids Such as dust, powders and fibers, gaseous atmospheres such as steam and smoke, dust and extraction plants, discharge of warmers and low pressure environments such as aircraft equipment and military reconcile bellows and compressors.
High temp flex ducting is double layer, good heat resistance, scalable; External through the spiral wire play a role in wear and tear protection, can drag on the ground will not damage the ducting, the external wire tightly clamp the wall, not easy to knot, Toughness; arbitrary flexing and bending.
Material: Internal and external stainless steel wire reinforced and special glass fiber coating, spiral wire: Stainless steel (VA)
Temperature range: approximately -60 ° C to +400 ° C, for short periods up to approximately +500 ° C. The range of the size from 75mm to 1000mm, can do any length.
Structure: Patented CP structure, external spiral wire support (metal sheet + wire), double wall;
Many customers do not know how to install the flexible ventilation ducting, do not know how to choose the size, in fact, this is very simple, the outer diameter of the device or ventilation system interface size is the inner diameter of the air ducting to be purchased. Ducting are based on the inner diameter, for example: the outer diameter of the interface is 250mm, then buy the inner diameter of 250mm ducting hose on it.
If you any interested or questions about our clamped high temp ventilation hose, please feel free to click contact us or email: info@eiduct.com or Mobile(WhatsApp): 00-86-187-1155-3123, or our other website: ductinghose.com, we are always here to satisfy your requirement!
High temp flex ducting is double layer, good heat resistance, scalable; External through the spiral wire play a role in wear and tear protection, can drag on the ground will not damage the ducting, the external wire tightly clamp the wall, not easy to knot, Toughness; arbitrary flexing and bending.
Material: Internal and external stainless steel wire reinforced and special glass fiber coating, spiral wire: Stainless steel (VA)
Temperature range: approximately -60 ° C to +400 ° C, for short periods up to approximately +500 ° C. The range of the size from 75mm to 1000mm, can do any length.
Structure: Patented CP structure, external spiral wire support (metal sheet + wire), double wall;
Many customers do not know how to install the flexible ventilation ducting, do not know how to choose the size, in fact, this is very simple, the outer diameter of the device or ventilation system interface size is the inner diameter of the air ducting to be purchased. Ducting are based on the inner diameter, for example: the outer diameter of the interface is 250mm, then buy the inner diameter of 250mm ducting hose on it.
If you any interested or questions about our clamped high temp ventilation hose, please feel free to click contact us or email: info@eiduct.com or Mobile(WhatsApp): 00-86-187-1155-3123, or our other website: ductinghose.com, we are always here to satisfy your requirement!
Send Email
ECOOSI
ECOOSI
Jim5040
ECOOSI